Tap to Review – NFC Table Stand for Cafés, Shops and Salons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Counter stand with an embedded NFC sticker: customers tap their phone to open your review page.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A clean counter or table stand for small businesses. An NFC sticker is sealed inside; write your review link to it, and customers just tap their phone on the stand to leave a review. Works with any review platform – you choose the link.
Customize it
Your own text, icon, uploaded logo, or a QR code for phones without NFC – plus Follow us, Menu, Wi-Fi, Pay and Book presets, and keychains, discs and cards. Free, no sign-up, runs in your browser:
https://3dmakerbench.com/nfc-tag-generator
Files
nfc-review-stand – the stand plate and its slotted base, laid out side by side (one colour)
colour-1-tag, colour-2-design and stand-base – the same model split into parts for AMS / MMU multi-colour printing
You'll need
One round NFC sticker, 25 mm (NTAG213 or NTAG215)
A free NFC writing app on your phone (for example NFC Tools) to write your review link to the sticker
How to print it (sticker sealed inside)
Add a pause at 1.6 mm in your slicer (before layer 9 at 0.2 mm layers).
When it pauses, drop the sticker into the round pocket and resume – it gets sealed in.
For two colours on a single-extruder printer, add a filament change at 2.6 mm so the design and text stand out.
Push the plate into the slot in the base. The stand is 80 × 108 mm.
Print settings
Layer height: 0.2 mm (the pause height above is for 0.2 mm layers)
Walls: 3
Infill: 20%
Supports: none
Material: PLA or PETG (about 81 g of PLA)
Made with 3D MakerBench – free, browser-based 3D printing generators.
