Mikrotik RB5009 0.5U Mini-Rack 10-inch Ears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @sourcecreate_4805973's model. Have both sides so easier to print in one go.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The objective of this design, was true 0.5U mini-rack ears, that accommodate the 2-pin terminal connector on the side.
Printing
The included part is for the left side. Mirror it in your slicer to print the right side.
Orientation: Front face down on print bed.
Material: PETG
Supports: Yes, organic.
Infill: I used 25%, I haven't tested others.
Mounting
I used the included M4x8mm hex button/rounded head bolts from the Mikrotik RB5009 ears kit - see the bottom of the RB5009 for what bolt head would be supported.
I've heard it can be mounted without screws.
Thanks @sourcecreate_4805973 for the original model
