Mikrotik RB5009 0.5U Mini-Rack 10-inch Ears
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of @sourcecreate_4805973's model. Have both sides so easier to print in one go.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The objective of this design, was true 0.5U mini-rack ears, that accommodate the 2-pin terminal connector on the side.
Printing
The included part is for the left side. Mirror it in your slicer to print the right side.
Orientation: Front face down on print bed.
Material: PETG
Supports: Yes, organic.
Infill: I used 25%, I haven't tested others.
Mounting
I used the included M4x8mm hex button/rounded head bolts from the Mikrotik RB5009 ears kit - see the bottom of the RB5009 for what bolt head would be supported.
I've heard it can be mounted without screws.
Thanks @sourcecreate_4805973 for the original model
