Minimal Vertical IKEA Skadis Mount for Netgear GS308E (v4) Switch - Left- & Right-Facing Options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic vertical IKEA Skadis mount for the Netgear GS308E (v4) switch. Left and right facing options available.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimal Vertical IKEA Skadis Mount for Netgear GS308E (v4) Switch
Most mounting solutions for the Netgear GS308Ev4 I found were either incompatible with Skadis, in the wrong orientation, or required a lot of time and material to print. So I decided to create my own minimal solution which prints without any supports. Both options for the switch facing to the left and right are available.
Important: this version does not work with the rubber feet attached to the switch. Remove them before using this model!
Easy Installation
Just slide the front and rear mounts onto the switch's casing. For correct orientation, please take a look at the pictures. The front mount's square mounting joints snap into the switch's mounting holes. The rear mount just has to be horizontally aligned with the next fitting row of the peg board holes.
Easy Print
Choose the desired orientation (switch ports facing left or right) and print the according front mount. The rear mount is always the same file. You need one front and one rear mount. All parts are already included in the .3mf files. Print all parts as oriented, no supports needed. I recommend PETG with 3 walls, 5 top and bottom layers, and 20% infill.