Measureometer 3000
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purely mechanical design for measuring small items - 0.1mm accuracy!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
How to use:
1) Move the probe a few millimeters away from the wall (left side of the device).
2) Take the object you want to measure, and place it between the wall and the probe.
3) Move the probe towards the object until it barely touches it.
4) Read the results on the far right of the device. Numbers represent millimeters, the tiny lines represent 0.1mm.
If the parts don't fit, carefully use a knife or screwdriver for sanding the holes.
Recommended Print Settings:
Nozzle: 0.4mm can work, but 0.2mm or 0.25mm are better.
Infill: 25%.
Perimeters: 3 Walls.
Material: PLA/PETG, tough composites such as PC-CF or PPA-CF may improve accuracy.
Support: No.
Bed adhesion: No.
*Measuring accuracy may vary depending on printer and materials.