Measureometer 3000
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Purely mechanical design for measuring small items - 0.1mm accuracy!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
How to use:
1) Move the probe a few millimeters away from the wall (left side of the device).
2) Take the object you want to measure, and place it between the wall and the probe.
3) Move the probe towards the object until it barely touches it.
4) Read the results on the far right of the device. Numbers represent millimeters, the tiny lines represent 0.1mm.
If the parts don't fit, carefully use a knife or screwdriver for sanding the holes.
Recommended Print Settings:
Nozzle: 0.4mm can work, but 0.2mm or 0.25mm are better.
Infill: 25%.
Perimeters: 3 Walls.
Material: PLA/PETG, tough composites such as PC-CF or PPA-CF may improve accuracy.
Support: No.
Bed adhesion: No.
*Measuring accuracy may vary depending on printer and materials.