1 / 2
Standoff for 5/8 inch (16 mm) tubing — zdjęcie 1
1 / 2

Standoff for 5/8 inch (16 mm) tubing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These standoffs clamp onto 5/8 inch (16 mm) tubing and hold it about 2 inches (50 mm) away from the mounting surface.

Ocena
5 / 5
Polubienia
4
Pobrania
26
Wydruki
1
Wyświetlenia
197
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

My water softener has an overflow drain tube.  I needed a way to position it above the floor drain, while maintaining an air gap.  I designed these standoffs to hold the tube in place at an appropriate height.

The screw holes are all just over 4 mm in diameter.  I used M4 x 8 mm screws and M4 nuts to hold the clamps closed.  I used #8 x 1" wood screws to attach the standoffs to the floor.

I printed it using PETG with 20% infill.  The lower part needs supports, but the upper part doesn't.

Tagi