1 / 2
Standoff for 5/8 inch (16 mm) tubing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These standoffs clamp onto 5/8 inch (16 mm) tubing and hold it about 2 inches (50 mm) away from the mounting surface.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 1
- Views
- 197
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
My water softener has an overflow drain tube. I needed a way to position it above the floor drain, while maintaining an air gap. I designed these standoffs to hold the tube in place at an appropriate height.
The screw holes are all just over 4 mm in diameter. I used M4 x 8 mm screws and M4 nuts to hold the clamps closed. I used #8 x 1" wood screws to attach the standoffs to the floor.
I printed it using PETG with 20% infill. The lower part needs supports, but the upper part doesn't.
