Filament-hinged box with lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small box with lid, that uses a piece of filament as a pin through, so basically you need no additional hardware
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
there's two versions, one has some different size pins on it (originally, i needed a box to keep an assortment of o-rings and thus this came up), and one simple box, with no pins, just a square (altough chamfered internally) box.
Place lid facing down and you'll need no supports, everything is chamfered in that purpose. For the hinge, thread a piece of filament through, altough the hole itself is only 2mm, so its a tight fit for a standard 1.75mm filament, try drilling it first, or at least deburr it with a blade. And it helps to cut the filament piece at an angle, arrow like.
at 20% infill, its only like 35 grams and around an hour to get it printed