Filament-hinged box with lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small box with lid, that uses a piece of filament as a pin through, so basically you need no additional hardware
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
there's two versions, one has some different size pins on it (originally, i needed a box to keep an assortment of o-rings and thus this came up), and one simple box, with no pins, just a square (altough chamfered internally) box.
Place lid facing down and you'll need no supports, everything is chamfered in that purpose. For the hinge, thread a piece of filament through, altough the hole itself is only 2mm, so its a tight fit for a standard 1.75mm filament, try drilling it first, or at least deburr it with a blade. And it helps to cut the filament piece at an angle, arrow like.
at 20% infill, its only like 35 grams and around an hour to get it printed