Elegoo Mars Pro LCD Shim Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Summary This shim is designed to allow the use of the stock Mars LCD on the Mars Pro As the standard LCD Screen…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 2
- Wyświetlenia
- 322
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Summary
This shim is designed to allow the use of the stock Mars LCD on the Mars Pro
As the standard LCD Screen protector is a reported .018" thick while the Pro is .045" their standard screens will sit recessed by around 0.68mm.
This shim/spacer is 0.68mm and should result in the standard screens fitting flush in the Pro Model.
(this is a work in progress and has not been tested yet, and may need a slight tweak in the z high to account for transferring imperial to metric, and double-sided tape used so please let me know how you get on).
Update 16/07/2020:
Elegoo has told me the following.
Mars pro tempered film thickness 1.0mm
Mars tempered film thickness 0.48mm
So, I have added a 0.52mm spacer to fit their measurements, along with the larger user measured 0.68mm.
Will Confirm what one is right when I change out my Pro LCD, or if I get a comment confirming what size worked best.
Category: 3D Printer Parts