ASUS RT-AX59U IKEA SKADIS mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm not shouting, it's really all caps 🤷 Allows you to hang said router on said pegboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A IKEA SKADIS mount for the RT-AX59U that uses the factory base/backplate as a part, so you don't lose that bit of plastic to some junk drawer.
It's not a robust mount, so make sure you print it from strong materials. If you push on the bottom of the router after it's on the SKADIS board, something will break - so don't push.
Assembly
It's a bit of work, I couldn't figure out a way to make this an easy, snap-fit assembly.
For the backplate, you'll need M3x12 bolts and matching threaded inserts. Shorter (4mm) and longer (up to 7mm) inserts both work. See photos for reference.
The bottom cover is taped on, 1.5mm thick double sided tape goes on the bump.
Materials
I recommend PETG with a 25% infill - more is not necessary
Source and remixing
If you want to remix, ask for the FreeCAD source file and you shall receive! I have not uploaded it because it's a bit of a mess.