K2 Systems Singlehook Distance Plate Singlerail 36
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K2 distance plate with different heights fitted for Singlehook / Singlerail36 System.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some distance plates to correct the heights of the singlehook. K2 has some official plates in 2mm thickness. I needed just some and different heights. So I designed some plates in 2mm, 3mm and 4mm height. K2 recommends not to stack more than 2 plates (4mm in total) with the stock screws. So if you need more you have to replace the screw for a longer one!
Version 2 is stackable. Please use ASA filament and 100% infill (all solid). So if you thighten the rail to the hook everything holds up!
I used ASA and it worked fine! Prints without supports. The notches of the plates have to face the hook. In other words: Bottom side shows up.