K2 Systems Singlehook Distance Plate Singlerail 36
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
K2 distance plate with different heights fitted for Singlehook / Singlerail36 System.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some distance plates to correct the heights of the singlehook. K2 has some official plates in 2mm thickness. I needed just some and different heights. So I designed some plates in 2mm, 3mm and 4mm height. K2 recommends not to stack more than 2 plates (4mm in total) with the stock screws. So if you need more you have to replace the screw for a longer one!
Version 2 is stackable. Please use ASA filament and 100% infill (all solid). So if you thighten the rail to the hook everything holds up!
I used ASA and it worked fine! Prints without supports. The notches of the plates have to face the hook. In other words: Bottom side shows up.