2-Gang Patress Box Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spacer for a 2-Gang Patress box. There's a 1-Gang version lurking here:…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a spacer for a 2-Gang Patress box. There's a 1-Gang version lurking here: https://www.thingiverse.com/thing:4018006
I was fitting some controlled sockets and a couple of my patress boxes were too shallow; hence the need for a spacer (easier than chopping out the brick for a deeper patress box).
Yes, I know you can buy these for not-a-lot from a DIY store but I wanted black and they're not so freely available.
The outer dimensions (149 x 89mm) are for an Energenie/MIHome 2-Gang Nickel 13A socket (https://energenie4u.co.uk/catalogue/product/MIHO021) but I've included the Fusion 360 design so you can tweak it to suit.
I've uploaded 8, 10 and 12mm versions as stl files.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: DIY