2-Gang Patress Box Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spacer for a 2-Gang Patress box. There's a 1-Gang version lurking here:…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 122
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a spacer for a 2-Gang Patress box. There's a 1-Gang version lurking here: https://www.thingiverse.com/thing:4018006
I was fitting some controlled sockets and a couple of my patress boxes were too shallow; hence the need for a spacer (easier than chopping out the brick for a deeper patress box).
Yes, I know you can buy these for not-a-lot from a DIY store but I wanted black and they're not so freely available.
The outer dimensions (149 x 89mm) are for an Energenie/MIHome 2-Gang Nickel 13A socket (https://energenie4u.co.uk/catalogue/product/MIHO021) but I've included the Fusion 360 design so you can tweak it to suit.
I've uploaded 8, 10 and 12mm versions as stl files.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: DIY