1 / 2
Garmin Varia RTL515 mount for Enlee dual bottle cage bracket — zdjęcie 1
1 / 2

Garmin Varia RTL515 mount for Enlee dual bottle cage bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Garmin RTL515 mount for Enlee dual bottle cage bracket

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mounts to the center holes on an Enlee dual bottle cage extension bracket, allowing you to have two water bottles on the sides, and a Garmin Varia RTL515 in between. May work for other rear lights/radars, provided they use the same size socket.

I printed this as it is oriented, with supports underneath and at the "bottom" lip where the garmin socket would rest - the latter isn't necessary, but you may have to clean up the bridging a little so the screw holes line up if you don't. You can orient it however you like, though :)

2026-10-21 - This broke on me during a cold morning and I don't know if it was the filament or the print so I revised it to be a bit thicker, and made the mounting holes slots instead. No long term data yet. 

Tagi