Lido Classic Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A classic piece remodeled for an older generation seat bolt mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Two versions are available where the Hirth Ring and the Base utilize rounded tabs rather than the original squared tabs. Both designs are simply preference based and either versions will have no issues with fitment as the Hirth ring is slightly beveled and the tabs slightly undersized for easy installation into the Bases Hirth Ring recess.
- Print all parts (Coupler, Base, Hirth Ring) in their default position.
- Supports are not required for the Coupler and either Hirth Rings.
- Snug Support Style is recommended to reduce object scaring.
- Print with a 0.4mm Nozzle.
- Print Resolution (Layer Height) tested at 0.20mm and 0.28mm for the Coupler and Base but the Hirth Ring should be printed at 0.08mm or the lowest available layer height for your printer.
Coupler
Infill Density: 100%
Support Type: None
Support Style: N/A
Layer Height: 0.20mm
Base
Infill Density: 100%
Support Type: Normal(auto)
Support Style: Snug
Layer Height: 0.20mm
Hirth Ring
Infill Density: 100%
Support Type: None
Support Style: N/A
Layer Height: 0.08mm