Lido Classic Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A classic piece remodeled for an older generation seat bolt mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Two versions are available where the Hirth Ring and the Base utilize rounded tabs rather than the original squared tabs. Both designs are simply preference based and either versions will have no issues with fitment as the Hirth ring is slightly beveled and the tabs slightly undersized for easy installation into the Bases Hirth Ring recess.
- Print all parts (Coupler, Base, Hirth Ring) in their default position.
- Supports are not required for the Coupler and either Hirth Rings.
- Snug Support Style is recommended to reduce object scaring.
- Print with a 0.4mm Nozzle.
- Print Resolution (Layer Height) tested at 0.20mm and 0.28mm for the Coupler and Base but the Hirth Ring should be printed at 0.08mm or the lowest available layer height for your printer.
Coupler
Infill Density: 100%
Support Type: None
Support Style: N/A
Layer Height: 0.20mm
Base
Infill Density: 100%
Support Type: Normal(auto)
Support Style: Snug
Layer Height: 0.20mm
Hirth Ring
Infill Density: 100%
Support Type: None
Support Style: N/A
Layer Height: 0.08mm