1 / 16
Cougar Cranium and Mandible (Puma concolor) — zdjęcie 1
1 / 16

Cougar Cranium and Mandible (Puma concolor)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cougar cranium and mandible remixed from Oregon State University

Ocena
0 / 5
Polubienia
14
Pobrania
29
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These models are remixed from a cougar cranium and mandible (Puma concolor-FW3221) originally made available on Sketchfab by Oregon State University Ecampus under CCA license. 

My changes:

These models had a very high poly count, so I decimated them quite a bit, filled holes, and smoothed rough areas (mostly noise).

Print settings:

Cranium:

  • 0.20 mm layers

  • 3 walls

  • 8% grid infill

  • tree supports at 30

    • top z distance = 0.2

    • top interface spacing = 0

    • top interface layers = 2

    • tip diameter = 2

    • initial layer expansion = 5

Mandible has all the same settings as the cranium but with 0.16 mm layers.

In my pics, I printed these on a Bambu A1 with esun bone white PLA (I was running low on my Sunlu bone white). Even after decimation, these models have lots of detail.

Bambu profile on Makerworld.

Tagi