1 / 16
Cougar Cranium and Mandible (Puma concolor) — image 1
1 / 16

Cougar Cranium and Mandible (Puma concolor)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cougar cranium and mandible remixed from Oregon State University

Rating
0 / 5
Likes
14
Downloads
29
Makes
0
Views
141
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

These models are remixed from a cougar cranium and mandible (Puma concolor-FW3221) originally made available on Sketchfab by Oregon State University Ecampus under CCA license. 

My changes:

These models had a very high poly count, so I decimated them quite a bit, filled holes, and smoothed rough areas (mostly noise).

Print settings:

Cranium:

  • 0.20 mm layers

  • 3 walls

  • 8% grid infill

  • tree supports at 30

    • top z distance = 0.2

    • top interface spacing = 0

    • top interface layers = 2

    • tip diameter = 2

    • initial layer expansion = 5

Mandible has all the same settings as the cranium but with 0.16 mm layers.

In my pics, I printed these on a Bambu A1 with esun bone white PLA (I was running low on my Sunlu bone white). Even after decimation, these models have lots of detail.

Bambu profile on Makerworld.

Tags