Watch Case Back Polishing Arbor – Internal Expanding Collet / ID Chuck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for watch case backs or bezels for polishing or sanding.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Polishing watch case backs by hand against a spinning wheel usually results in rounded edges and uneven finishes. Professional horological holders keep the part centered and rotating, but commercial tools are expensive.
This model is a budget-friendly expanding split-collet mandrel tailored for watchmakers and modders. By mounting the case back from its interior perimeter, the external face and bevels remain completely unobstructed. When chucked into a drill or lathe, rotating the part against your polishing medium guarantees even material removal across the entire 360-degree radius.
Hardware Required
1x M5 Machine Screw:
Standard hex socket cap screw works best
30mm length or more
for smoother operation chamfer the bottom edge of the screwhead with a file while spinning the screw with a drill
1x M5 Hex Nut
mount the hex nut into the nut adaptor
1x Washer to distribute the clamping force
inner diameter 5mm
outer diameter 15mm or more