Santa Sleigh | Candy Holder & Tree Ornament 3-Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-to-print 3-piece Christmas sleigh designed for FDM printing. No supports, no hardware and simple assembly.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This 3-piece Christmas sleigh was designed as a simple, fun and practical holiday decoration that anyone can print.
The sleigh features decorative snowflake cutouts, classic curled runners and two mounting holes, allowing it to be used in several different ways.
Fill it with candy, chocolates or a tiny gift, place it under the Christmas tree, use it as a festive table decoration — or simply add a string and hang the whole sleigh directly on your tree. 🎄
✨ Features
🎅 Christmas sleigh design
🍬 Perfect as a candy holder
🎁 Great for small gifts
🎄 Can be used as a Christmas tree ornament
🧵 Two holes for attaching a string
❄ Decorative snowflake details
🧩 Only 3 separate parts
⚡ Quick and easy assembly
🖨 Designed specifically for FDM printing
✅ No supports required
✅ No complicated orientation
✅ No screws or additional hardware
✅ Easy to print even for beginners
✅ 15g filament
🎨 Perfect for PETG, PLA, PLA Silk, PLA Glitter and other decorative filaments
🧩 Assembly
The sleigh consists of only 3 printed parts.
Simply print all parts and slide/connect them together.
No screws, magnets or other hardware are required.
The construction keeps the model simple while creating a surprisingly rigid finished decoration.
For permanent assembly, you can optionally add a tiny drop of CA glue, although it is not necessary if your printer is well calibrated.
🎄 Hang it on your Christmas tree!
There are two dedicated holes in the upper section of the sleigh.
Run a string through both holes to keep the sleigh hanging evenly.
You can leave it empty as a decoration or add a lightweight candy inside. 🍬
🍬 Candy Holder
The inside of the sleigh works perfectly for:
candy canes
wrapped chocolates
sweets
small Christmas gifts
gift cards
tiny toys
This makes it a nice little printable Christmas gift by itself.
🖨 Printing
The model was designed with easy FDM printing in mind.
Recommended settings
Material: PETG/PLA
Layer height: 0.20-0.28 mm
Nozzle: 0.4 mm
Walls: 2
Infill: 100%
Supports: ❌ NO SUPPORTS
All parts are designed to print flat on the build plate.