Hoyer 6000 series bezel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Untested prototype: a two-piece replacement bezel with mirrored halves, sized for a Hoyer 6000-series watch.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Untested prototype. The latest revision is watertight and passed the supplied digital dimension checks, but physical fit of the 32.9 mm opening and 35.5 mm terminal-shoulder revision has not yet been confirmed.
A replacement bezel for the Hoyer 6000 series
The bezel is split into two mirrored halves that follow the dial while leaving the side openings clear. Filled transitions join the circular rim to the wider end sections, and each far edge rounds continuously down to the terminal floor.
Print two copies of the half
watch_bezel_half.stl is the printable master; print it twice and rotate one copy 180 degrees around the dial. watch_bezel_assembly.stl shows the intended relationship between both pieces. The OpenSCAD source is included for dimensional adjustments.
Check fit before final use
The modeled opening is 32.9 mm, the circular outside diameter and terminal shoulder span are both 35.5 mm, and the side separation is 9.3 mm. Import at 100% in millimeters, inspect the sliced result, and test the prototype gently against the watch.
Key facts
Circular opening: 32.9 mm
Shoulder span: 35.5 mm
Side separation: 9.3 mm
Print pieces: 2 mirrored halves
Project page with previews and every download: https://beau-gosse-dev.github.io/projects/3d-models/hoyer-6000-series-bezel/
Design by Beau Gosse. Licensed CC BY-NC-SA 4.0: credit the creator, noncommercial use only, share adaptations under the same license.