Foam Dart Disintegrating Belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disintegrating belt for foam dart ammo. This was designed for the Xshot Insanity HorrorFire Dread Hammer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
My son wanted a disintegrating ammo belt for his Xshot Dread Hammer. I found designs for flywheel belt-fed blasters, but none for a springer. For this belt to work, the dart must make a good seal with the bottom of the belt. I have successfully tested with Xshot and generic darts, but Nerf Elite darts are a slightly smaller diameter and only work 50% of the time. I am still working on finding a configuration that works for all darts.
Printed .20 mm Layer Height with 10% infill. No supports required.
In the future, I will also be designing an ammo box that will attach to the Picatinny-style rail of the Dread Hammer.
Inspired by Disintegrating Belt Links for Rage Fire on Thingiverse