Key Addict - Morse Code Key Break-out Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A break-out box for connecting up to 10 Morse code keys with support for chaining multiple boxes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A break-out box for Morse code keys. The front provides connectors for 10 keys total (2x1/4" and 8x1/8"). The back provides an input and output - either one can be used for the radio, one additional key, or chained to another box/octopus/etc. Disconnect anywhere in the middle for a 2-radio or other split setup.
Note: All input cables must be TRS, otherwise you will short out the ground and ring.
Parts
1x DigiKey 889-1816-ND/Amphenol Audio ACJS-MHDC
10x DigiKey 2223-SJ3-35053A-ND/Same Sky SJ3-35053A
Assembly
See the attached picture. I screwed in all of the connectors, and then stripped out lengths of wire to solder them all in series. Once tested, glue the front box onto the back using your preferred glue.
Usage
My radio configuration for the FT991A (no Winkeyer) is:
Set 012 Keyer Type to your preferred paddle configuration
Set one of the primary key shortcuts as 'Keyer' to toggle straight
Use the Keyer toggle to switch between straight key/paddle
This allows a quick toggle between devices while having them all plugged in.
