1 / 2
Key Addict - Morse Code Key Break-out Box — image 1
1 / 2

Key Addict - Morse Code Key Break-out Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A break-out box for connecting up to 10 Morse code keys with support for chaining multiple boxes.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

A break-out box for Morse code keys. The front provides connectors for 10 keys total (2x1/4" and 8x1/8"). The back provides an input and output - either one can be used for the radio, one additional key, or chained to another box/octopus/etc. Disconnect anywhere in the middle for a 2-radio or other split setup.

Note: All input cables must be TRS, otherwise you will short out the ground and ring.

Parts

  • 1x DigiKey 889-1816-ND/Amphenol Audio ACJS-MHDC

  • 10x DigiKey 2223-SJ3-35053A-ND/Same Sky SJ3-35053A

Assembly

See the attached picture. I screwed in all of the connectors, and then stripped out lengths of wire to solder them all in series. Once tested, glue the front box onto the back using your preferred glue.

Usage

My radio configuration for the FT991A (no Winkeyer) is:

  • Set 012 Keyer Type to your preferred paddle configuration

  • Set one of the primary key shortcuts as 'Keyer' to toggle straight

  • Use the Keyer toggle to switch between straight key/paddle

This allows a quick toggle between devices while having them all plugged in.

Tags