1 / 1
Ezviz rain cover (12mm shorter shroud) — zdjęcie 1

Ezviz rain cover (12mm shorter shroud)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ezviz Rain Cover remix of the model from @SolidWorksMaker

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
GNU General Public License v3.0

I used @SolidWorksMaker model originally, but found that the shroud covered some of the FOV of the camera.

 

This means that at night when the camera enters IR mode, the infrared light floods the shroud and blinds the camera - not ideal for those dark places.

 

I did a quick remodel of this to make the shroud 12mm shorter. This is now 38mm instead of 50mm.

 

I fitted this to a C3WN perfectly and had no issues with IR in the night. I'm now printing another for my C3N. Please see the original model for further compatibility - I will soon make a diameter edit to fit the CTQ3N as this is a slightly wider camera.

 

Printed in white Sunlu Petg

  • Height 0.2

  • Walls 4

  • Top Shells 4

  • Bottom Shells 3

  • Infill 100% Gyroid

I used variable layer height for a much better finish.

 

Be cautious when fitting this around the reset button, as fitting it on the button will cause the camera to go into a constant state of rebooting and ultimately erase your network config.

 

Please back up or locate your device verification code beforehand. I had to reconfigure mine twice.

Tagi