Ezviz rain cover (12mm shorter shroud)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ezviz Rain Cover remix of the model from @SolidWorksMaker
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- GNU General Public License v3.0
I used @SolidWorksMaker model originally, but found that the shroud covered some of the FOV of the camera.
This means that at night when the camera enters IR mode, the infrared light floods the shroud and blinds the camera - not ideal for those dark places.
I did a quick remodel of this to make the shroud 12mm shorter. This is now 38mm instead of 50mm.
I fitted this to a C3WN perfectly and had no issues with IR in the night. I'm now printing another for my C3N. Please see the original model for further compatibility - I will soon make a diameter edit to fit the CTQ3N as this is a slightly wider camera.
Printed in white Sunlu Petg
Height 0.2
Walls 4
Top Shells 4
Bottom Shells 3
Infill 100% Gyroid
I used variable layer height for a much better finish.
Be cautious when fitting this around the reset button, as fitting it on the button will cause the camera to go into a constant state of rebooting and ultimately erase your network config.
Please back up or locate your device verification code beforehand. I had to reconfigure mine twice.
