1 / 7
Sony battery holders NP-FW50 and NP-FZ100 — zdjęcie 1
1 / 7

Sony battery holders NP-FW50 and NP-FZ100

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flat orientation of these Sony battery holders so they fit in tighter pockets.

Ocena
5 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
27
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

I tried several existing battery holders for both my Sony cameras and I found most to be too fat due to the fact they mostly orientated the batteries back to back upright.

Since I fit them in my sleeve pocket of my camera bag, I wanted some thinner holders.

Thus I designed a combined holder, 2 times NP-FW50 and 1 time NP-FZ100 to go in my camera bag lid.

I then decided to model some individual ones too, since not everybody has both those cameras.

I will consider making custom combinations but please give me some time as I do it in my spare time. So if you want a 4 x 4 of one type, or you want to combine both types in a 3 x 4 style, let me know.

I printed these in ASA but any other will do I suppose. They are supposed to be printed flat without supports. I used 0.2 layer height and the locks come out a bit staggered so run a few strokes of sandpaper if you do not like it to be so rough. After a few times inserting the batteries it does get smoother. The fit is precise, not tight but not too loose either. If I shake my holder they slightly rattle, which to me is perfect.

There is no risk of them falling out at all. I deliberately did not design a finger slot in the bases, to keep strength. Mine come out without problems just pushing from the top of the batteries.