1 / 7
Sony battery holders NP-FW50 and NP-FZ100 — image 1
1 / 7

Sony battery holders NP-FW50 and NP-FZ100

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flat orientation of these Sony battery holders so they fit in tighter pockets.

Rating
5 / 5
Likes
4
Downloads
8
Makes
0
Views
31
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

I tried several existing battery holders for both my Sony cameras and I found most to be too fat due to the fact they mostly orientated the batteries back to back upright.

Since I fit them in my sleeve pocket of my camera bag, I wanted some thinner holders.

Thus I designed a combined holder, 2 times NP-FW50 and 1 time NP-FZ100 to go in my camera bag lid.

I then decided to model some individual ones too, since not everybody has both those cameras.

I will consider making custom combinations but please give me some time as I do it in my spare time. So if you want a 4 x 4 of one type, or you want to combine both types in a 3 x 4 style, let me know.

I printed these in ASA but any other will do I suppose. They are supposed to be printed flat without supports. I used 0.2 layer height and the locks come out a bit staggered so run a few strokes of sandpaper if you do not like it to be so rough. After a few times inserting the batteries it does get smoother. The fit is precise, not tight but not too loose either. If I shake my holder they slightly rattle, which to me is perfect.

There is no risk of them falling out at all. I deliberately did not design a finger slot in the bases, to keep strength. Mine come out without problems just pushing from the top of the batteries.