Double Soap holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds two soaps, for example shampoo and conditioner in solid soap form
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Why two soaps, you might ask?
Some use shampoo and conditioner in solid soap form. To distinguish between them, you might want to print the two sides in different colours.
The concave shape for each soap has a diameter of 75mm.
Printing
V1: just use the provided orientation in the 3mf file.
V2: Load the stl, separate to parts/objects, then make sure to properly orient the middle feet. The little ratchet shapes shall point in the air.
Assembly
I hope this is fairly self explanatory. Th middle feet are little dovetails that slide and then lock together the two sides.
V1 might need some glue. V2 might be already lock in place due to the ratchet shapes. If not, give us feedback in the comments and use glue.