Tesla Model Y Garage Door Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The remote holder is for 2026 Model Y but might fit Model 3 also, and the remote is from Chamberlain.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for 2026 Model-Y might fit other models and garage remote is Chamberlain
I needed a way to place the garage door remote so it's easy to access within reach, and only place I can find was to place in the door storage area. So designed this holder and so far it's working without any issues. The remote slides in perfectly does not slide out, I have made small on the bottom for ease of removal.
You can print in PLA but I strongly suggest using PETG.
Print Settings:
Material: PETG recommended
Layer Height: 0.28 mm
Walls: 3–4
Infill: 15 Gyroid
Supports: Yes
If you find this model helpful then please provide feedback.