SMART INDOOR GARDENING ECOSYSTEM - fits on Small Printers, Fully Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My gardening system for indoors, designed for taking care of your plants with everything fitting on one small tray.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
SMART INDOOR GARDENING ECOSYSTEM

A Indoor Gardening Ecosystem that all fits into one Small Tray, that can Print on a Prusa MINI or Bambu Lab A1 Mini.
The system includes:
Crusher + Pestle 2-in-1
Waste Bin
Dibber
Root Comb
Multi-Tray
100ml/50ml Scoop
Sieve
5ml Spoon
10ml Spoon
Plant Stake
Trowel
Tweezers
Its Perfect for People who work with Planters inside.
What You Can Do With It
The Crusher + Pestle and Sieve work together to break up and prepare soil. The Dibber makes holes for seeds, while the Root Comb helps gently straighten roots when moving plants into new soil.
The Scoop measures up to 100ml, with a 50ml marker, while the 5ml and 10ml Spoons are made for smaller measurements.
The Stake helps support plants, the Trowel is made for digging, and the Tweezers are designed for smaller, more precise tasks. The Waste Bin gives you somewhere to put small bits of soil, roots, leaves, and other gardening waste as you work.
Compact Design
The entire ecosystem is designed around an 18x18 cm build plate, just barely fitting within the build area. This makes it possible to print the system on smaller machines such as the Prusa MINI or Bambu Lab A1 Mini.
The tray holds all the Tools other than the Trowel.
Built in Small Details
The Scoop holds 100ml and has a 50ml marker. Its handle includes a hole for hanging, which is also found on the 5ml and 10ml Spoons and the Trowel.
The Spoons have their measurements printed directly onto the side, along with a grip pattern on the handles.
The Plant Stake has a horizontal-only grip pattern and a notch at the top to help hold the plant in place.
The Trowel has a sharp digging tip and a 45° angled wall, designed specifically around support-free printing.
The Tweezers are kept small for fine grabbing and use geometry limited to 45° angles to make them Print-in-Place.
The Crusher + Pestle is combined into one tool so soil can be crushed directly in the Sieve.
The Sieve Slots into the Tray, and tilts away if you aren't using it and need more work space.
Print-in-Place Design
Everything is Print-in-Place.
The Waste Bin is designed to print in Vase Mode, reducing the amount of filament used.
Print Settings
The following settings were used for the tested versions. All settings are based around a 0.4mm nozzle.
Crusher + Pestle 2-in-1

Nozzle: 0.4mm
Layer Height: 0.16mm
Perimeters: 3
Top Shell Layers: 6
Bottom Shell Layers: 4
Infill Pattern: Gyroid
Infill Density: 15%
Supports: No
Brim: No
Waste Bin

Nozzle: 0.4mm
Mode: Vase Mode
Layer Height: 0.12mm
Perimeters: 1
Top Shell Layers: 0
Bottom Shell Layers: 1
Infill Pattern: N/A
Infill Density: 0%
Supports: No
Brim: No
Dibber

Nozzle: 0.4mm
Layer Height: 0.12mm
Perimeters: 3
Top Shell Layers: 15
Bottom Shell Layers: 5
Infill Pattern: Gyroid
Infill Density: 15%
Supports: No
Brim: Optional
Root Comb

Nozzle: 0.4mm
Layer Height: 0.12mm
Perimeters: 3
Top Shell Layers: 5
Bottom Shell Layers: 5
Infill Pattern: Grid
Infill Density: 10%
Supports: No
Brim: No
Multi-Tray

Nozzle: 0.4mm
Layer Height: 0.12mm
Perimeters: 1
Top Shell Layers: 3
Bottom Shell Layers: Open (0), or 3 if preferred
Infill Pattern: Gyroid
Infill Density: 20%
Supports: No
Brim: No
5ml + 10ml Spoons

Nozzle: 0.4mm
Layer Height: 0.16mm
Perimeters: 3
Top Shell Layers: 6
Bottom Shell Layers: 4
Infill Pattern: Gyroid
Infill Density: 15%
Supports: No
Brim: No
Scoop

Nozzle: 0.4mm
Layer Height: 0.24mm
Perimeters: 3
Top Shell Layers: 4
Bottom Shell Layers: 3
Infill Pattern: Grid
Infill Density: 15%
Supports: Normal (Snug)
Brim: No
Optional multicolor setup included in the 3MF
Sieve

Nozzle: 0.4mm
Layer Height: 0.12mm
Perimeters: 3
Top Shell Layers: 4
Bottom Shell Layers: 6
Infill Pattern: Gyroid
Infill Density: 15%
Supports: No
Brim: No
Plant Stake

Nozzle: 0.4mm
Layer Height: 0.24mm
Perimeters: 4
Top Shell Layers: 4
Bottom Shell Layers: 3
Infill Pattern: Gyroid
Infill Density: 15%
Supports: No
Brim: 5mm, Outer
Trowel

Nozzle: 0.4mm
Layer Height: 0.20mm
Perimeters: 3
Top Shell Layers: 5
Bottom Shell Layers: 3
Infill Pattern: Grid
Infill Density: 15%
Supports: No
Brim: No
Tweezers

Nozzle: 0.4mm
Layer Height: 0.16mm
Perimeters: 10
Top Shell Layers: 6
Bottom Shell Layers: 4
Infill Pattern: N/A
Infill Density: N/A
Supports: No
Brim: 2mm, Outer and Inner
A Few More Details
The system is designed to be useful for everyday indoor gardening, from starting seeds and preparing soil to repotting, measuring, supporting plants, and handling small or delicate parts.
The 3MF includes the optional multicolor setup for the Scoop.
The tray and tools were designed as one ecosystem rather than as a collection of unrelated gardening models, with the focus being on fitting as much functionality as possible into a small, printable package.