Liczymy pasujące modele…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
This model adds Peglock compatibility to the iFixit Pro Tech Toolkit holder originally designed by @toxvrd. Mount it by placing two Board Attachments on your pegboard with one empty hole between them. The attachment plates on the back of…
This is a custom Gridfinity module designed to hold the iFixit Pro Tech Toolkit in its original case! Built at a 3x5 footprint and twice the height of a standard Gridfinity module (10 units tall), this design provides a perfect snug fit…
A regular pentagonal bipyramid can be made with the norm 5 and norm 4. Connecting two pentagonal bipyramids together requires the 90 deg 1 and 2. There is a left and right orientation. Edge is used to connect along one of the square sides.
Needed parts: USB-C PD module (I used 20v PDC004), 2 part epoxy, Wires, XT-60 female connector.
EDC Toolkit based around the Trojan 28-Piece Driver Set. It is great to stow in the glovebox of your car, bottom of a backpack etc. Lighter can be used to melt glue-stick, and there is a small space for extra items (bandaids, painkillers…
A basic toolkit for doing DIY chainmail. When using pliers grip rings using the middle for most grip. The opening ring work well and was designed around 18 gauge rings.
Bottle Cage–Mounted Bicycle Toolkit Container A compact bicycle toolkit holder designed to mount in a standard bottle cage. The container securely holds essential tools via friction-fit. Compatible tool dimensions: Multitool width: 44 mm…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
This is the official 3D Modeling ToolKit for the JSAUX ModCase for ASUS ROG Ally（PC0119） . With this toolkit, you can easily design custom accessories for the ModCase, unleashing your creativity. Download the STL files to start 3D…
This is a set of connectors to make connected dodecahedrons. The ones that are named stellated are for stellateing a pentagon face. Simple is for a plain triple connector. Inter is used for connecting two dodecahedrons face to face.
2 part desk organiser for all of the primary 3d printing tools that are included in Crealitys 3d printing toolkit, works best with K1 series or any 3d printer with legs. This organiser was designed to hang off of the side of a desk/shelf…
A simple box with secure sliding lid which holds the few basic tools for the MK4 printer: Heating block wrench Nozzle Wrench T10/T8 wrench T6 wrench, 2.5mm allen wrench (2 places, I put in a spare) 3mm allen wrench 2mm allen wrench 1.5mm…
13 piece pottery clay cutting and shaping set. id love to see your prints of these files.
Are you looking for the right tools to improve your 3D models? You want to perfect the look of your models and make any imperfections disappear. There are many tools available, but which ones are the most effective for sanding? 🤔 Share…
This is a TPU case for a squared shaped toolkit. One Model has fixing points. Wall thickness is 1.5 mm. Printparameters: TPU D58 shore Layer hight 0.16 or 0.2 Infill: 18% but can be more Speed depending on printer 40 to 50 mm/s ish.
Extension Storage for Essential Electronics Toolkit This modular storage system is designed specifically to complement the Essential Electronics Toolkit . The original box is great, but lacks space for the additional tools many of us rely…
Needed parts: USB-C PD module (I used 20v PDC004), 2 part epoxy, Wires, XT-60 female connector.
Before printing I turned both parts over and printed using support.
About the design This WERA micro driver holder revision allows for the storage of WERA #118008 & #118010 straight-blade drivers which are 20mm longer than the other micro drivers. It is built upon the terrific original tool holder design,…
This toolkit holder clips into place and can be slid across the top bar to hold the toolkit in vertical or horizontal orientation. This version of the toolkit holder includes a slot in the back for storing a secondary build plate. All…
EDC Toolkit based around the Trojan 28-Piece Driver Set. It is great to stow in the glovebox of your car, bottom of a backpack etc. Lighter can be used to melt glue-stick, and there is a small space for extra items (bandaids, painkillers…
Designed for out-of-office client meetings, impromptu sketching, UX evaluation—grab what you need from the phone itself! This backplate accessory has friction-fit pockets for: mini sticky note (1.5X2") pen mini measuring tape (1.25x1.25").
Swapped to using Gridfiity to provide standardised boxes within my project draw and needed somewhere to put the original Creality toolkit. Final design is a 2x8 grid with sufficient room around to tools to enable easy selection. If you've…
This is a direct replacement for the foam insert you received with your Carvera CNC toolkit. Using this insert, you can place gridfinity organizers however you like. The main insert, that you can't change, holds the screwdriver, pins,…
Calibrate E-steps, flow and hole xy expansion before printing for best fit! A side project I made while procrastinating a different one :L It includes legends for the sizes but that unfortunately doesn't show well on transparent filament.…
Fits the iFixit Pro Tech Toolkit (#IF145-307-4)
Keep your Creality Ender 3 V3 KE toolkit organized and within easy reach with this custom pegboard holder! Designed specifically for the V3 KE's included accessories, this holder is a crucial Quality of Life upgrade for your print…
posted this due to popular demand and people asking, posting as a STEP file as it can be easily worked with and modified for someones specific toolkit. Enjoy people!
bordel: French for brothel. Commonly used as a slang to designate a mess, a bunch of things, or as an interjection. Designed by kustom3 and myself. ISO shape idea from Plaketdebeur. Tested with 0.2mm layer height and 0.4mm nozzle, other…
Magnetic toolkit for Core One operators, including: A nozzle holder A pliers holder for your needle nose and flush cutter A screwdriver holder A holder for the original wrenches that came with your Prusa Each holder uses 2-3 10mm dia 3mm…
A minimalistic 6x5 Gridfinity ( https://gridfinity.xyz/ ) fixture that holds the Carvera Air toolkit foam insert. The fixture consists of 4 corner pieces that each have a cutout for you to easily label. The corner pieces are in total 12mm…
I recently purchased a new nozzle kit for my Centauri Carbon, and everything came in a tiny box. The kit is still available on Amazon at https://www.amazon.co.uk/dp/B0FX2ST1T6 Honestly, it was a mess, and really difficult to find the bits…
BMW part number 71111117440, holds the trunk-mounted toolkit closed. This is a remix of Schraube für Bordwerkzeug for BMW vehicles by macgyver125 . I split the single body into 3 parts and attach them with a 30mm M3 screw and locknut.…
I use my iFixit Essential Electronics Toolkit on a regular basis, and I wanted to be sure it was always close at hand when I needed it. This simple design allows you to slide the toolkit neatly under your desk, keeping your workspace…
Organize your RC workbench with this compact Skadis mount for the ToolkitRC M6D Dual Smart Charger . While the original design was great for all-in-one portability, many workshop setups use a dedicated power supply tucked away elsewhere.…
A basic toolkit for doing DIY chainmail. When using pliers grip rings using the middle for most grip. The opening ring work well and was designed around 18 gauge rings.
Multiboard mount for the Creality Rotary Tool Kit that connects with the Multipoint mount. Recommended Print Settings: 3 Walls/Perimeters 15% infil Multipoint Mounts - Mounting solution for both Multiboard or other organizer solutions.
While Sepheza's creation is pretty good, it didn't hold the tools quite the way I wanted them. Too much movement once in place, and fiddly with my big hands. Usually, I have one hand full, and I want to reach in and grab that "one" item…
🔧 A1 Mini Custom Toolkit Organizer 🧩 Description Keep your workspace clean and efficient with this custom-designed toolkit organizer for the A1 Mini . This model is specifically tailored to perfectly fit the original tools that come with…
Bottle Cage–Mounted Bicycle Toolkit Container A compact bicycle toolkit holder designed to mount in a standard bottle cage. The container securely holds essential tools via friction-fit. Compatible tool dimensions: Multitool width: 44 mm…
Bambu Lab H2D Toolkit to store extra pieces from the printer. Uses a magnetic lid. Magnets (Glued in Place) ->…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs This is a 3D-printable tabletop simulation toolkit designed for clinical simulation, hospital and prehospital…
As original legs are very fragile i printed new with the same design and dimensions as original. Fits perfect on my Toolkit RC M600 model. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2…
I was frustrated using my Dynamite RC toolkit while wrenching on my 3D printer. I had to keep swapping the bit in the handle when it came to installing/removing different sized fasteners. Finally this handle will allow me to have multiple…
I was frustrated using my Dynamite RC toolkit while wrenching on my 3D printer. I had to keep swapping the bit in the handle when it came to installing/removing different sized fasteners. Finally this handle will allow me to have multiple…
This is a complete simcard toolkit to aid you in converting your simcard into your desired sizing. Of course, you only can go smaller. should you have multiple simcards, you can print a simcard holder for their respective sizing too if…
Customized version of http://www.thingiverse.com/thing:2241113 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2241113 Instructions Using the following options: cut_height = 10 sizes = [3, 2.5, 2, 1.5 ]…
Customized version of http://www.thingiverse.com/thing:2241113 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2241113 Instructions Using the following options: cut_angle = 20 sizes = [ 4, 3, 2.5, 2, 1.5 ]…
I got me a ToolkitRC M7 charger, it is quite nice ! No one had made a case for it yet so i mocked something simple up. I use a decent amount of XT30 batteries as well so i put a holder on the front for an XT60 to XT30 adapter, there is…
//English + // Italian // English Parametric toolkit to generate any type of under cup or anti-tipping. It manages glasses, bottles, flasks and cans of any diameter and height, both circular and of other shapes (eg square or hexagonal or…
If you have the ToolKitRC M6, you know how fragile the tiny little feet on the bottom can be. I broke one of those feet after a few months of use and then there wasn't any good way to make sure the fan on the bottom had airflow during…
A nice little box in a Star Trek styling! Print instructions Prints as one! Prints vertically. No additional supports should be required. Remove built-in supports for the latch with a hobby knife before trying to open the box. Remove…
THIS PROJECT HAS MOVED TO GITHUB https://github.com/IdoMagal/The-Boardgame-Insert-Toolkit/ This OpenSCAD library was created to make it easy to create board game inserts with lids for either horizontal or vertical storage, without any…
The original feet on this device have two relief slots, which makes them way too flimsy. They almost seem as though they were engineered to fail. These replacements have just one slot so they're stronger yet still have enough flex to be…
Box for the Ifixit Pro Tech Toolkit, low edged and non-stackable.
Print Settings Printer: Ankermake M5 Rafts: No Supports: No Resolution: .2 Infill: 20% Filament material: PLA
Update 1/9/24: Fresh off the printer: a revamped Skadis mount, powered by your valuable feedback! This upgrade streamlines printing, hugs the skadis board tighter, and even throws in an extra hole for good measure, just in case. I love…
New v 2.0 with additional Containers for extra stuff :) Feel free to leave a like it helps a lot to motivate me V2.0--------------------- Printet sucessully on my mk3s 20mm Layer height 15% Infill Bamboo Standard PLA white V1.0…
Inspired by the Charging Case created by Turtle laboratories ( https://turtlelaboratories.com/blogs/projects/portable-field-charging-box-for-isdt-q6-rc-charger ) I decided to make my own field charging kit using the newly acquired…
I used supports on the pegs, you might not have to, but I did, so you know, up to you bb. Thanks, I love you.
Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…
NOTE, be careful when using a power drill to screw it in, I slightly cracked mine along a layer line because I overtightened it. not a problem other than it doesn't look perfect. screw it in and leave a little extra and manually use a…
Features Removable power bank tray The power bank tray slides in and out easily, and is secured with clips. Accessing your 18650 batteries is very fast. Furthermore, the 18650 holder is an off-the-shelf part requiring minimal soldering…
PARAMETRIC - Hexagonal Toolbox IT UNROLLS Flat giving you access to all drawers and pods Useful for specialised toolkits or toting around your DND mini's STEP files included so you can add dividers to pods or specialise the pods to hold…
Use this to add a drawer and stability to a shelf and fully support the hexapod toolkits ( .6 tolerance) standard default size. not currently parametric Print instructions Paint a line of supports on teh inside of teh bracket midway (like…
Remix of https://www.printables.com/model/358201-tool-hanger-for-ender-cr-30. Includes a cutout for if you have the Linear Rails on your Y-Axis.
Gedruckt in mattem PETG von Extruder, 0,2 mm Layerhöhe, 15% Infill und organischen Stützen die Haken
An easy print that holds all of the day-to-day 3d printer tools. This piece holds: 2 pliers (or cutters) 4 tweezers or 2 tweezers and scissors (see pictures) 5 hex keys of various sizes + little paths to sit in (designed to fit Creality…
Meant to be a compact alternative for fitting lots of tools on the workbench Printed with 15% infill, 0.4mm nozzle, no supports (but a brim wouldn't hurt)
Engineered for seamless access to the iFixit Essential Electronics Toolkit, it complements and showcases splendidly on the honeycomb wall, especially when placed next to the 3D-printed iFixit Mako Driver display/shelf by 3D.Nystad
Remixed the great model by plomdawg to remove the ifixit logo
This is a simple bracket for hanging a ToolkitRC P200 power supply underneath a shelf. There is also space underneath for the power cables.
Printed from TPU D58 shore with 0.6 mm Nozzle. For 48/50 parts Toolkit flat model. At the bottom there is a little hole so that air can escape when the kit is inserted.
This is a toolbox case for the A1 and A1 Mini that replaces the old cardboard box. The only assembly needed is to snap the plastic tray into the container. I'm super happy with how this turned out, especially how clean the design on the…
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
I wanted to add a hole for the driver and some of the bits that come with the basic toolkit you get with a battery or screen repair kit. Printed with the following specs. Printer: Creality Ender-3 S1 Material: Inland PLA+ Print Temp: 205…
A FIXED version of the iFixit Prying Toolkit bin. Now Gridfinity-compatible with a 1x4 layout.
Toolkit that sits on the top of the meanwell power supply that accommodate the Allen key set, needlenose plyers etc. Printed on smooth sheet, with supports. Only suitable for printers that have a meanwell LRS-350-24 power supply that is…
Simple solution for using the Bosch 18V batteries as a power input source for M6D charger. For attaching the Bosch battery is used this model > Adapter with fuse >…
Case to unite the ToolkitRC M7 charger and power supply in a single piece, facilitating use and transport.
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
A simple bulk density measurement tool based on the following instruction made by ARPRO: https://www.arpro.com/contentassets/ddc7e343f45d45408103709f5bcfe153/arpro-bulk-density-measurement-instructions-en.pdf This set adds another…
Various items that have an M10 thread. I got a little carried away with my path extrusion script. Note: The M10 flat rods and bolts are designed for printing flat (i.e. with the print bed parallel to the bolt axis) and have altered…
Found a nice tin box and finally streamlined my travel toolkit. This is probably completely useless to anyone but me, but maybe someone can use it as a template. The design is optimized to reduce rattling, nothing can fall out and the…
When you have the big parkside batteries and want to charge your drone batteries outdoor. Contact are make from 0,5mm thin copper plate dimensions 10x20mm.
More easily printable versions of the iFixit Case Lid with some fancy configurable options. This has been sitting in my drafts due to a missing image for over a year now, whoopsies. The picture of the printed lid is what happens when you…
Ultimate lab toolkit I present to you the ultimate lab toolkit , low cost and great versatility. It is a modular design, easy to assemble and to which various pieces can be attached to turn it into various pieces of equipment. A true all…
