ToolKitRC M6 Replacement Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement foot to fix the easily breakable ones that come on the ToolKitRC M6 charger
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have the ToolKitRC M6, you know how fragile the tiny little feet on the bottom can be. I broke one of those feet after a few months of use and then there wasn't any good way to make sure the fan on the bottom had airflow during charging. I proceeded to draw up this simple little foot to fix it and replaced both the originals. The new version doesn't fold up like the original, but it is much sturdier.
I recommend printing it on its side and then sand down the top/bottom as necessary to get a good press fit. The model was designed 6.1-mm thick, which is pretty close to the required thickness. SolidWorks 2020 (I think) file included.