Extra Driver Handle for Traxxas & DynamiteRC Toolkit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Avoid changing the bits every time you change to a different size screw. Print as many extra handles as you need.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was frustrated using my Dynamite RC toolkit while wrenching on my 3D printer. I had to keep swapping the bit in the handle when it came to installing/removing different sized fasteners. Finally this handle will allow me to have multiple bits at the ready. The flexible gripping feature internal to the handle still allows for quick change if required, but holds the bit in place so it doesn't fall out. The bits are 4mm hex and should work with other kits not listed here.
Prints standing up with no supports. I've tested in PETG, but it should still work with PLA.