Squatchee-spin thread mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squatchee-spin - improved propeller retainer, mount suitable for smaller buttons.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My kids love the original design https://www.printables.com/model/1777704-squatchee-spin, but I have printed the original one a few times and it was getting broken before fitting to the cap. First thing I have learned - don't print the mount in matte PETG - is very brittle compared to standard PETG. But I found another two issues with the design: even printed in standard PETG the propeller was getting detached after one drop on the floor with the pins broken; the mount was too loose for kids caps with ca 10 mm button. I changed the retaining system of the propeller to threaded one and the mount element to fit smaller buttons. I hope you and the kids enjoy my version.