Blast Gate. 1.5 inch SCH 40 pipe. Workshop Dust Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimized for 1.5" SCH 40 pvc pipe. Dust collection blast gate / shutoff valve.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 165
- Wydruki
- 1
- Wyświetlenia
- 1893
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Remix of https://www.thingiverse.com/thing:4297295
Resized and optimized for 1.5" SCH 40 pvc pipe.
Dust collector blast gate / shutoff valve.
Requires one M5x15 bolt, washers, nut. Or M5x20, washers, nyloc nut. Qty 3 M3x10 bolts with no nuts.
Drill out one body half and the spacer to 3mm, bolts will self-tap into the back side.
Woks well with Ridgid brand 1-7/8" shop vac hose. Midsection of the hose is a slip fit into this and 1.5" pipe fittings. Ends can also be repurposed for other fittings. Generic 50mm cyclone with a 5gal bucket for dust separation.
Edit:
1/18/22 Added Body-1.5_SCH-tall, holds the vac hose better.
1/31/22 Added Slider-1.5-R, Slider-1.5-L with better stop finish. Smaller od Bushing original was printing a touch tight.
Category: DIY