Blast Gate. 1.5 inch SCH 40 pipe. Workshop Dust Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized for 1.5" SCH 40 pvc pipe. Dust collection blast gate / shutoff valve.
- Rating
- 0 / 5
- Likes
- 65
- Downloads
- 165
- Makes
- 1
- Views
- 1,893
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Remix of https://www.thingiverse.com/thing:4297295
Resized and optimized for 1.5" SCH 40 pvc pipe.
Dust collector blast gate / shutoff valve.
Requires one M5x15 bolt, washers, nut. Or M5x20, washers, nyloc nut. Qty 3 M3x10 bolts with no nuts.
Drill out one body half and the spacer to 3mm, bolts will self-tap into the back side.
Woks well with Ridgid brand 1-7/8" shop vac hose. Midsection of the hose is a slip fit into this and 1.5" pipe fittings. Ends can also be repurposed for other fittings. Generic 50mm cyclone with a 5gal bucket for dust separation.
Edit:
1/18/22 Added Body-1.5_SCH-tall, holds the vac hose better.
1/31/22 Added Slider-1.5-R, Slider-1.5-L with better stop finish. Smaller od Bushing original was printing a touch tight.
Category: DIY