1 / 7
Center Console Trays for '24 Bronco Sport. — zdjęcie 1
1 / 7

Center Console Trays for '24 Bronco Sport.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple set of organizer trays for the Bronco Sport center console.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to print a tray for my center console storage that allowed me to stash things under neath and keep smaller things at the top and accessible.  So I 3D scanned my center console and made a pair of trays that fit snug to the internal geometry of the inside cavity. 

Features a cutout to allow cables to be routed down to the USB port beneath and a scallop cut away on each to make it possible to lift out either tray with ease.  

Print bottom down on the plate.   No supports, 3 walls.    Uses about 160g filament total. 

Print in PETG, ABS, or ASA.  While this wont be in direct sunlight the interior of the car can get quite warm and the print will will sag under load and deform due to the heat if printed in basic PLA.

I've included the scan data if you want to use it for reference in making your own trays or accessories for the center console. 

Please share your makes and rate these files if you found them useful!

Tagi