COCA-COLA CAN COASTER DRIP TRAY [MULTI-COLOUR]

⚙ Coca-Cola Can Coaster Drip Tray

Keep your gaming desk or workspace clean with this high-contrast drip tray coaster. Designed specifically to fit all standard cans, this model features the iconic logo precision-cut out of the top tray, allowing the vibrant colour to pop through.

⚙ Features:

• Multi-Colour: Preset and optimized for Multi and AMS units.

• Two Styles Included: Classic Red & White, plus the Inverted White and red edition
  (perfect for Coca-Cola Fans).

• Dual-Function: Acts as a standard coaster while the tray catch captures any cold-can sweat or accidental spills.

⚙ Print Settings & Profiles

• Filament Type: PLA or PETG (PETG is recommended if you frequently use it for hot drinks or want extra washability)

• Layer Height: 0.2mm (Standard) or (0.16mm for higher detail)

• Infill: 15% (Grid/Gyroid)

• Walls/Perimeters: 3 walls for clean, solid edges around the logo cut-outs.

• Supports: None required! The underside logo and top tray cut-outs are designed to print perfectly flat on the build plate.

⚙ Important Slicer Settings

⚠ Important Slicer Setting: You must set your Wall Generator to Arachne or enable Detect Small Walls in your slicer settings. This ensures fine geometry and thin wall details slice correctly without leaving missing paths or gaps.

⚙ How to Customize Colours

1. Open the project in You're Slicer

2. In the left panel, switch from the Global tab to the Objects tab.

3. Expand the coaster assembly to view individual parts.

4. Select individual objects/parts and assign your desired filament colour slot
   (or right-click → Change Filament).

⚙ Note

• Adhesion: Please ensure your bed is clean and well-levelled for the perfect first-layer finish.

• If you enjoy this print, please consider sharing a photo and leaving a comment and like! 

• I cant wait to see how yours turns out!