1 / 4
QIDI Max 4 Polar Cooler Hose Guide – Homing Collision Fix — zdjęcie 1
1 / 4

QIDI Max 4 Polar Cooler Hose Guide – Homing Collision Fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified front section of the Polar Cooler hose guide to prevent collision with the front frame during homing.

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of Teddie’s QIDI Max 4 Polar Cooler flexible hose guide.

The original design works well, but on my printer the first flexible section could move forward and contact the front inner frame during homing.

I redesigned the first section as a rigid offset guide. It immediately moves the Polar Cooler tube away from the collision area, while the flexible segmented section starts further away from the print head.

The rigid section also includes an attachment point for the tension cord.

Because of the redesigned rigid front section, only 5 C segments are required instead of 7 in the original setup.

This remix contains only the modified front section. All remaining parts should be downloaded from the original model by Teddie.

Tested on QIDI Max 4 with Polar Cooler.

Tagi