Tableside Cable Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cable holder that attaches to a side table and keeps charging cables conveniently located and organized.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
A simple cable holder that attaches around the table top and snuggly fastens via the included cap screw models.
NOTE: It is best to work the threads through carefully with the screws before tightening down to the table. The threads are 1/4-20 UNC and can be worked with a regular tap and die set, or just carefully worked back and forth before normal use.
PRINTING TIP: Use variable layer height to achieve finer details on the threads. I printed the threads with a layer height of .1mm and the remainder of the part at .2mm.
-SABRE