1 / 3
Print-in-Place Sea Serpent - 26 Segments, No Supports — zdjęcie 1
1 / 3

Print-in-Place Sea Serpent - 26 Segments, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Long articulated sea serpent that prints in one piece, coiled in a spiral to fit an A1 mini bed. 26 hinged vertebrae.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A long low-poly sea serpent that comes off the plate already articulated: no assembly, no glue, no supports.

  • 26 hexagonal vertebrae with vertical pin hinges (0.4 mm clearance), tapering to an arrow tail

  • Horned head with an opening jaw

  • Printed coiled in a spiral (12° to 16° per hinge) so it fits the bed: 154 × 153 mm at 100 %

  • Same hinge system as my Print-in-Place Mechanical Dragon

Print settings

  • A1 mini and any bed ≥ 165 mm: 100 %, 0.20 mm, PLA, no supports: about 2 h 07 min, 42 g (Bambu Studio project included).

  • The only overhang is the roof of the mouth: it may sag slightly; paint a support there if you want it clean.

After printing: gently flex each joint once to break it loose, starting from the tail.

About this design

Designed in code (build123d / OpenCascade). Every hinge was checked for collisions in the print pose and through the full range of motion, and the file was sliced before release. Pictures are 3D renders; the desk shot is our render placed on an AI-generated background. If you print it, please post a make.

Español

Serpiente marina articulada de 26 vértebras que sale de la impresora de una pieza, enroscada en espiral: 154 × 153 mm, cabe en el A1 mini al 100 %. Sin soportes, 2 h 07 min, 42 g. Las imágenes son renders.

العربية

ثعبان بحري مفصل من 26 فقرة يطبع قطعة واحدة ملتفا على شكل حلزون، بلا دعامات. الصور عروض ثلاثية الأبعاد.