Print-in-Place Sea Serpent - 26 Segments, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Long articulated sea serpent that prints in one piece, coiled in a spiral to fit an A1 mini bed. 26 hinged vertebrae.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A long low-poly sea serpent that comes off the plate already articulated: no assembly, no glue, no supports.
26 hexagonal vertebrae with vertical pin hinges (0.4 mm clearance), tapering to an arrow tail
Horned head with an opening jaw
Printed coiled in a spiral (12° to 16° per hinge) so it fits the bed: 154 × 153 mm at 100 %
Same hinge system as my Print-in-Place Mechanical Dragon
Print settings
A1 mini and any bed ≥ 165 mm: 100 %, 0.20 mm, PLA, no supports: about 2 h 07 min, 42 g (Bambu Studio project included).
The only overhang is the roof of the mouth: it may sag slightly; paint a support there if you want it clean.
After printing: gently flex each joint once to break it loose, starting from the tail.
About this design
Designed in code (build123d / OpenCascade). Every hinge was checked for collisions in the print pose and through the full range of motion, and the file was sliced before release. Pictures are 3D renders; the desk shot is our render placed on an AI-generated background. If you print it, please post a make.
Español
Serpiente marina articulada de 26 vértebras que sale de la impresora de una pieza, enroscada en espiral: 154 × 153 mm, cabe en el A1 mini al 100 %. Sin soportes, 2 h 07 min, 42 g. Las imágenes son renders.
العربية
ثعبان بحري مفصل من 26 فقرة يطبع قطعة واحدة ملتفا على شكل حلزون، بلا دعامات. الصور عروض ثلاثية الأبعاد.