1 / 2
Soap Dish with Raised Ribs and Drain Spout — zdjęcie 1
1 / 2

Soap Dish with Raised Ribs and Drain Spout

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Soap dish with 8 raised ribs and a drain spout on one side, so the bar dries instead of sitting in water.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Soap dish with 8 raised ribs and a drain spout on one side, so the bar dries instead of sitting in water.

  • 8 ribs 6 mm high keep the soap out of the water

  • Drain spout on the short side

  • 110 × 75 × 20 mm, rounded corners

Print settings

A1 mini, 0.20 mm, PLA: 53 min (43 g). No supports. Bambu Studio project included.

Parametric OpenSCAD source included: change the values at the top of the file.

About this design

Checked for overhangs and bed fit, and sliced in Bambu Studio before release. Pictures are 3D renders. Makes and feedback welcome.

Español

Jabonera con nervios elevados y pico de desagüe. 53 min (43 g).

العربية

صحن صابون بأضلاع مرتفعة وفتحة تصريف.

Tagi