1 / 3
Desk Clamp Cup Holder + Headphone Hook [no supports/no extra hardware] — zdjęcie 1
1 / 3

Desk Clamp Cup Holder + Headphone Hook [no supports/no extra hardware]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cup holder and headphone hook that clamps onto the edge of a desk.

Ocena
0 / 5
Polubienia
11
Pobrania
65
Wydruki
1
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a combination of 2 things:
1. cup holder
2. headphone hook

This prints easily, with no supports, glue or extra hardware needed!

Assembly is super intuitive:
1. Insert Screw from the bottom.
2. Attach Screw Pad onto the end of Screw (it should click together).
3. slide Cup Holder onto Hook by the 2 protruding notches.
4. Place assembly on the edge of a desk and tighten Screw.

Once assembled, the overall dimensions (not including screw) are 14.5 x 10.0 x 11.5 cm (5.7 x 3.9 x 4.5 in).
I have oriented the parts the way they should be printed, so all you have to do is slice the model and hit print! Print with at least 3 walls for strength.

There is a bigger version of this model, which adds a phone holder and pen holder. Check it out here. Thank you!

Tagi