WallArt - Cat Door 001
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute cat decoration for door frames and corners – simple, playful and easy to print. 🐈🖤
- Ocena
- 5 / 5
- Polubienia
- 315
- Pobrania
- 1102
- Wydruki
- 6
- Wyświetlenia
- 3106
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
🐈 Cat Door Corner Wall Art
A simple and playful decoration for every cat lover.
This design is made to sit on the upper corner of a door frame, creating the illusion of a curious cat climbing or peeking around the edge. 😄
The clean black silhouette works especially well against white or light-colored walls and gives the room a subtle but funny decorative detail.
Perfect for:
Cat lovers
Living rooms
Bedrooms
Kids rooms
Hallways
Offices
Door frames
Pet-themed rooms
Gifts for cat owners
✨ Features
Cute climbing cat silhouette
Designed for door-frame corners
Clean and minimalist look
Lightweight
Easy FDM print
No supports required
Easy mounting
Scalable directly in your slicer
Looks great in matte black PLA
Perfect small decoration for almost any room
The model works particularly well in black PLA, but you can of course print it in any color to match your interior.
📏 Model Thickness: Approximately 3 mm
📐 Scaling
The model can easily be scaled depending on your door frame and available space.
For the best appearance, I recommend printing it larger rather than smaller, especially if you want the thinner parts such as the tail and paws to remain strong.
Keep the original proportions when scaling.
🖨 Recommended Print Settings
Printer: FDM / FFF
Material: PLA recommended
Nozzle: 0.4 mm
Layer Height: 0.28 mm
Walls / Perimeters: 2
Infill: 15%
Infill Pattern: Rectilinear
Model Thickness: Approximately 3 mm
Supports: No
Brim: Usually not required
Raft: No
Print Orientation: Flat on the build plate
Cooling: 100% after the first layers
Wall Generator: Arachne or Classic
Recommended Speed
Outer Wall: Up to 250 mm/s on capable printers
Inner Wall: 200–300 mm/s
Infill: 250–300 mm/s
Top Surface: 150–200 mm/s
First Layer: 30–50 mm/s
💡 Tip: A textured PEI build plate can give the visible surface a very nice matte texture when printed face-down.
🛠 Mounting
The easiest mounting method is double-sided mounting tape.
Because the model is very lightweight, only small pieces of tape are usually needed.
Clean the door frame or wall surface before mounting for the best adhesion.