Motorcycle lambda/oxygen sensor connector plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is functional plug to use in place of the one coming from lambda/oxygen sensor wires.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is functional plug to use in place of the one coming from lambda/oxygen sensor wires on a SWM Superdual X motorcycle. Most likely many other motorcycles are using such 4-pin connectors, AI identified it as "Sumitomo 090 Series 4-Pin Automotive Connector".
I wanted to try some things with fuel injection and did not have possibility to buy/scavenge some stock connector, but needed it "today", so modelled and 3d printed one.
The crimp terminals are roughly 4mm x 2.5mm. The details are quite fine, so ideally 0.2mm nozzle would be better, but it worked for me printed with 0.4mm nozzle, just line width reduced to 0.25mm.